> For the complete documentation index, see [llms.txt](https://lexset-1.gitbook.io/lexset-seahaven/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://lexset-1.gitbook.io/lexset-seahaven/seahaven/readme/getting-started/simulation-editor/manipulators/replace/view-settings.md).

# View settings

This block provides replacement settings related to the camera view.

![](https://1909422608-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4GudP3s7lhKkLuTADYnf%2Fuploads%2FacLqokebmpQFOztMGPyv%2Fimage.png?alt=media\&token=a3ca5d24-a675-4988-b9f7-158a01804c75)

**Align to Camera:** If checked, replaced objects will face the camera (affected by rotation values).

**Distance to Replace (Min/Max):** Distance range from the camera within which objects will be replaced. If both values are set to 0, there will be no restriction.

**Replace in View:** If checked, only objects within the view of the camera will be replaced. The extents of the view may be restricted using X and Y view limits.

**View Limits X (Min/Max):** A pair of values where 0 is the left side of the frame and 1 is the right side of the frame.

**View Limits Y (Min/Max):** A pair of values where 0 is the bottom of the frame and 1 is the top of the frame.