> For the complete documentation index, see [llms.txt](https://lexset-1.gitbook.io/lexset-seahaven/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://lexset-1.gitbook.io/lexset-seahaven/seahaven/readme/getting-started/simulation-editor/manipulators/pose-objects-3.md).

# Load Object Along Curve

Loads objects along a curve

<figure><img src="https://1909422608-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4GudP3s7lhKkLuTADYnf%2Fuploads%2FhMO2gwi8F80wRAXfUdAJ%2Fimage.png?alt=media&amp;token=653106af-f845-4931-8325-b359c40ed842" alt=""><figcaption></figcaption></figure>

**Curve Name:** *Name of the curve(s) along which the objects will be loaded.*

**Object Collection:** *Collection of objects to load along the curve.*

**Curve Parameter (Min/Max):** *Defines the part of the curve to sample where 0 is the start of the curve and 1 is the end of the curve.*

**Curve Parameter Tolerance:** *The tolerance (between 0 and 1) to use when sampling points along the curve. Using a larger value will cause objects to be placed farther apart from one another.*

**Number of Samples (Min/Max):** *Number of points to sample for placing objects.*

**Random Rotation (Min/Max):** *A range of rotation values (in degrees) to apply to the objects after they have been placed and aligned to the curve.*